Where is the chiller placed when you build your brewery
The location and installation of the air-cooled chiller should consider the following points:
1. Prevent re-circulation of exhaust air by placing chiller in an open area to enable the smooth flow of air to the
condenser section.
2. Community noise must be addressed. And, on the roof applications, vibration, should be taken into account.
3. Access service should be considered. Land areas are preferred outside just because access easier.
In general, we suggest our customer to put the chiller outside firstly, to use the air as a heat sink.
But sometimes it is limited by the space, we need to put the chiller inside or on the roof. Does it works?
My answers is depends. When you consider to put the chiller inside, you need to ensure that the space
have a good air circulation (The top of the chiller is more than two meters from the ceiling). When you consider
to put the chiller on the roof, you need put the glycol water pump out and put it on the ground, this is because
many glycol pumps have a short suction and long lift, you can confirm it with supplier. If you can meet these two
conditions, you can put the chiller inside or on the roof. if you can't, you have to find another way.
If you have any questions about glycol chilling system in brewery system, please contact me freely.
Email: [email protected]
Phone: 0086 170 9164 4622
Get A Quote