Indirect cooling method: the refrigerant is a mixture of ethanol or glycol and water, it is cooled in the evaporator box of the ammonia refrigerator, the temperature is generally controlled at around -5°C, the refrigerant flows in from below and out from above.
Direct cooling method: The refrigerant in the cooling jacket is liquid ammonia and flows in a vertical flow type or horizontal flow type in a semi-circular tube. The liquid ammonia enters from above through the distribution tube and flows downwards.
Comparison of the two cooling methods
Compared to indirect cooling, direct evaporative cooling of liquid ammonia has the following advantages.
1. Energy savings of around 20%. The compressor operating temperature for direct evaporation is only about -5C.
In contrast, with indirect cooling, the compressor needs to be at a much lower temperature, thus
This results in a lower refrigeration capacity of the chiller. In addition, the refrigerant liquid ammonia can be delivered in much smaller quantities.
2. Less equipment is required. Direct cooling saves the alcohol or glycol water required for evaporation of liquid ammonia compared to indirect cooling.
water or glycol water and also eliminates the need for an evaporator.
3. Fewer insulation materials are required and installation costs are lower. As the flow of liquid ammonia is reduced, the use of pipe diameter becomes smaller, plus the container is reduced, reducing the consumption of insulation materials, but also save installation costs.
The safety of using liquid ammonia
Due to these significant advantages, more and more breweries are using liquid ammonia direct evaporative cooling.
The use of direct cooling requires attention to several aspects:
1. Firstly, liquid ammonia is an irritating odour and can be flammable and explosive under certain conditions.It is toxic and its safety must be considered when designing.
2. Secondly, the working pressure of liquid ammonia is high, and the permeability is very strong, so the welding quality of the jacket of the fermenter is also required.The welding quality of the jacket is also high.
3. The key technology for direct cooling of the fermenter is the structure type of the jacket and the welding quality.
 
If you are planning to build your own brewery. TIANTAI Brewery equipment could help you answer your questions and supply brewery equipment. We supply 2-150HL complete beer brewing equipment including malt milling equipment, brew houses equipment, beer fermenters /fermentation tank, brite beer tanks, beer bottling machine,beer canning machine, beer kegging machine, hopping machine, yeast propagation equipment. We also supply all auxiliary brewery systems like steam heating pipe and valves, water treatment, filter, air compressor etc. Everything in brewery are all in our list. 
 
If you need beer brewing equipment or microbrewery equipment, please contact us:
Cassie Liu
E-mail：[email protected]