Why have such configuration of MLWT+KT
The brewmaster usually condider many factors In the actural process of beer brewing, for brewing good quality beer, they choose the configuration can meet himself demands.
For example MLWT+KT
There might three factors can cause have such configuration:
1)The brewmaster consider filter the wort by nature/gravity, then the sprent grain can leave at filter and the wort can go into the whirlpool by it's Gravity.
So they separate the whirlpool under the mash&lauter tun.
Now most brewries use the pump to recycle the wort thus help with the lauter.
2)For the configuration MLT+KWT(Mash&Lauter tank+Kettle&whirlpool tank),
strictly brewmaster think if adopt electric heating method, the electric tube will effect the whirlpool.
So they also seperate whirlpool tank under mash&lauter tank. But the effect for the whirlpool is small.
Based on the reason (2), according to the configuration MLWT+KT, the whirlpool tank can by the way be used as wort storage tank,but the operate is a little complicated.
3)Usually in a brewpub have a hot liquor tank is a good news.
But for save the cost, with the such confiauration MLWT+KT,the kettle tank can also be used as a hot liquor tank and wort can storage at whirlpool tank.So then we can sparging.
Edited by Damon
Sales Manager in Tiantai Company
Email:[email protected]
Get A Quote