Hello everyone, this is Sharon here from Tiantai Beer Equipment Co., Ltd.
Welcome to visit our brewery equipment website!
Here we’d like to share with you this finished 1000L brewery project for our customers in Estonia, the 1000l brewhouse is most popularly used in micro breweries, restaurants or taprooms among our customers, it occupies a relatively small area and with a relatively low running cost by customizing the specific configurations included. If you are looking for similar size of brewery equipment for your business, feel free to contact us for more interested information and details please, Cheers!
 
As the iconic brewhouse layout, the two-vessel brewhouse is usually configured to realize single batch of beer brewing per day, heating sources are available to be customized based on personal requirements including steam, electric and gas fire. Usually the steam heating would be firstly suggested as to pursue better and even heating effects, but electric or gas fire are also available to be selected if the budget or other conditions is not allowed.
Main configurations included in the two-vessel brewhouse system:
★10HL Mash/Lauter Tun
★10HL Kettle/Whirlpool Tun
★20HL Hot Water Tank
★Non-slip Work Plateform
★Sanitary Centrifugal Pump [LYSF]
★Sanitary Piping
★Valves and Fittings
★Manual Water Mixing Station
★Manual Wort Cooling Station
★Pipeline Instrument Sensor
★25L Glass Wort Grant
★10M2 Heat Exchanger [304SS NANHUA]
★Pipe Filter
★Wort Aeration Station
★20L Yeast Feeder
 
1000L fermenters with side mounted manholes equipped as standard configurations.
Other configuration details mainly including:
★Interior Finish: Sanitary 2B finish, Pickled and Passivated; (8K Mirror finish optional)
★Exterior Finish: Oil brushed finish(2B, 8K Mirror finish optional)
★Interior full polished to 0.2~0.4 μm without dead corner
★Tank leakage test by water and gas, 4bar/60psi for 1hour, 2.5bar/37.5psi for 48 hours
★Tank Working Pressure: ≦ 2bar/30psi
★Conical bottom with 60° cone (customizable)
★Sanitary side mounted oval manhole with pressured door
★Top mounted double clamp 360° rotary CIP spraying ball and port, 1pcs
★CIP arm with four-way connection and butterfly valve
★CO2 blow-off arm with butterfly valve (Removable)
★Mechanical safe valve PVRV 2bar/30psi on top (1bar/15psi available)
★Full sanitary sampling valve with EPDM seal
★Hydraulic shock pressure gauge on CIP arm (Diaphram type for optional)
★Horizontal mounted rotating racking arm and port in cone with butterfly valve
★Discharge arm with butterfly valve, Removable and easy to clean
★Temperature gauge equipped
★4 sets heavy duty foot pad with up-down and slop adjustable
★Complete valves, fittings and all parts, Tri clamp/DIN Union available
★Pressure adjustable bunging valve 0.2-2.2bar as request
 
Tanks arrived and ready to be planted inside!
 
 
Other configurations and more details to be discussed to meet your personal demands and special requests, we shall be honored to support you build your brewery dream in any way we can.
 
Sharon
Email: [email protected]